Atop Technology AW5500 User manual - Manual (Page 83)

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
78
 Enter the WEP key or the WPA passphrase if necessary.
 Scroll to the end of the page and press “Apply”, please wait for some time for the
changes to apply.
 Then proceed to go to System Information, on the AP Client Information you can
confirm your AW5500 is connected to the Network selected if the status field displays a
signal percentage instead of disconnected. Also, you may also double check the wireless
connection status inside the client table of the connected AP.
Figure 5.7