Atop Technology AW5500 User manual - Manual (Page 75)

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
70
5 Operation Modes
5.1 Regular AP Mode
Regular AP mode’s welcome screen is as shown below, Figure 5.1.
Figure 5.1
Regular AP mode which is the factory default and the first option on the screen, allows
wireless clients to connect to a network, relaying data between the wired and wireless devices
in the network. It allows multiple wireless clients to access the network through AW5500’s
Ethernet interface (physical/wired connection). Its corresponding complete menu-tree is as
follows in Figure 5.2.