Atop Technology AW5500 User manual - Manual (Page 60)

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
55
4.10 System Log
4.10.1 Syslog
The Syslog function is turned on by default and cannot be turned off. It is used to log system
events and report to an external Syslog server if necessary.
Figure 4.30
 Enable Log Event to Flash: this would write log events to the local flash, otherwise the
logs would be cleared when the device restarts because they are stored in the RAM by
default.
 Log Level: 2 (we only allow logging at this level).
 Enable Syslog Server: enabling this option would allow you to send Syslog events to a
remote Syslog server.
 Syslog Server IP: Please specify the remote Syslog Server IP.
 Syslog Server Service Port: Please specify the remote Syslog Server Port.