Autoquip DOUBLE PANTOGRAPH LIFT - Manual (Page 15)

15
Travel
Cap.
(lbs.)
Model
Ld Ht
(in.)
Max
End
Load
Max
Side
Load
Std Min
Platform
Max
Platform
HP
Speed
fpm/sec
Ship Wt.
(min.
Platf)
500 36DP05*** 8.5 500 200 3/4 27 / 7 350
1500 36DP15 9.25 1000 500 25 / 8 400
3000 36DP30 10.75 1500 1000 12 / 16 500
3000 48DP30 11.25 2000 1000 1 1/2 7 / 33 800
6000 48DP60 12.75 2500 1200 11.5 / 22 850
9000 48DP90 15 3000 1500 9 / 38 1200
12000 48DP120 16.5 4000 1500 5.5 / 44 1450
9000 60DP90 16.5 3000 1500 5C 8 / 37 1600
12000* 60DP120 18 4000 1500 5V* 8.5 / 36 1700
9000 72DP90 17 3000 1500 5C 8 / 47 1800
12000* 72DP120 18.5 4000 1500 5V* 8 / 46 2300
9000 84DP90 18 3000 1500 5C 7.5 / 56 2400
12000* 84DP120 19.5 4000 1500 5V* 8 / 55 3000
9000 96DP90 19.5 3000 1500 5C 7 / 70 2950
12000* 96DP120 20.5 4000 1500 5V* 7 / 68 3500
3000 108DP30 17.25 2000 1000 8 / 67 2650
6000 108DP60 17.25 2500 1200 8 / 67 2650
9000* 108DP90 20.5 3000 1500 11.75 / 46 3300
12000* 108DP120 22 4000 1500 7.5 / 72 3900
3000 120DP30 18.75 2000 1000 6.8 / 88 3400
6000 120DP60 18.75 2500 1200 6.8 / 88 3400
9000* 120DP90 21 3000 1500 4400
12000* 120DP120 23 4000 1500 5000
3000 132DP30 17.5 2000 1000 14 / 47 2850
6000 132DP60 20 2500 1200 8 / 84 3650
9000* 132DP90 22 3000 1500 5300
12000* 132DP120 24 4000 1500 6050
3000* 144DP30 18.75 2000 1000 5C 11 / 64 3450
6000* 144DP60 21 2500 1200 5V* 7.5 / 93 4000
9000* 144DP90 23 3000 1500 5950
12000* 144DP120 25 4000 1500 6700
5V(HT)*
60 x 102 84 x 124
84 x 128
96 x 132
5C
5V*
84 x 116
36 x 48
96 48 x 80 60 x 104
60 36 x 54 48 x 84
8 / 91
8 / 73
* Remote PU (5V=5HP Vert)
STD. Power Unit = Internal
84 x 120
96 x 136
8 / 82
*Remote PU 5V(HT)= High Travel Tank
*** Single Cylinder
60 x 96
30 x 43 42 x 72
36 x 62 48 x 84
5C
5V*
60 x 96
54 x 82
54 x 88
36*
120
108
84
72
1 1/2
24 x 32
5C
5C
5V*
78 x 106
78 x 112
48*
144
60 x 92
132
48 x 70
72 x 108
60 x 106
72 x 113
LOAD CAPACITY
The load capacity rating is stamped on a metal nameplate that is attached to one side of
the lift Leg assembly. This load capacity rating is a net rating for a lift furnished with the
standard minimum platform. Each platform size listed above in Lift Specifications is the
Standard (Minimum) platform size for each model lift. The relief valve on the power unit
has been set to raise the lift capacity, plus a small amount for overload. When gravity roller
conveyors, fixtures, or special tops, etc, are installed on the lift platform,
after leaving the plant, deduct the weight of these components from the load rating to
obtain the net lifting capacity.
SPECIFICATIONS