Autoquip DOUBLE PANTOGRAPH LIFT - Manual (Page 8)

8
WARNING !
All warning and information decals should be in place as outlined in the “Label
Identification” section. If decals are missing or damaged, they should be
replaced with new ones. Contact Autoquip for replacements.
WARNING !
Lift platforms traveling below floor levels my create openings, and the shape
of the load and how the load is arranged on the lift may create a toe hazard as
the load passes the top edge of the pit. Both situations may require guarding
in accordance with Federal Regulations. Any such guarding must be installed
prior to operating the lift
WARNING !
The hydraulic velocity fuse (HVF) must be properly installed! The HVF is
attached to the elbow fitting in the trust angle port (casing end) of the cylinder.
Do not use a swivel fitting between the HVF and cylinder. If the HVF is
installed improperly, it will not lock up in the event of a catastrophic hydraulic
line break.
WARNING !
Use properly rated hoses only! Never use fittings or hoses that are not
properly rated for the intended use. Contact Autoquip for replacements.
WARNING !
Never exceed the rated capacity of the lift! Overloading, or uneven
loading, could result in load instability and cause serious personal injury.
SAFETY PRACTICES