MK Diamond MK-170 - Manual (Page 20)

20
Cleanup
Dispose of wastewater in accordance with applicable Federal, State and Local laws.
Ensure the saw is disconnected before completing the remainder of the
cleanup process.
NOTe:
MK-170 Tile Saw MaiNTeNaNCe
(A)
Ensure the ON/OFF Switch is
in the OFF position
(G)
Turn the motor OFF when work
is complete
(D)
Remove the pump Suction
Screen and clean the Water
Pump of all debris
(B)
Remove the Cutting Table from
the Water Pan
(H)
Unplug the GFCI from the
Power source
(E)
Fill the Water Pan with clean
water. Place Cutting Table on
Water Pan.
(C)
Dispose the contents of the
Water Pan
(I)
Remove the Cutting Table for
the Water Pan
(F)
Run the MK-170 until clear wa-
ter is seen at the blade cooling
ports (Approx. 1 minute)
CaUTiON