Blue Sea Systems 8051 Digital Voltmeter Panel - 7 to 60V DC - Manual

Marine Electrical Products
DC Digital Voltmeter Panel
PN 8051
Features
• PN 8235 DC Digital Voltmeter
• 7-60 Volts DC
• 4 digit display
• 3 position switch for multiple battery banks
• Full-size 2-3/4” meter
Specifications
Voltage: 60 Volts DC Maximum
Inches Millimeters
Dimensions: 5-1/4 x 3-3/4 133.4 x 95.3
Mounting Centers: 4-7/16 x 2-15/16 112.7 x 74.6
Blue Sea Systems Inc. Phone (360) 738-8230
425 Sequoia Drive Fax (360) 734-4195
Bellingham, WA 98226 USA E-mail [email protected]
www.bluesea.com
WARNING
Installation
1. Use 16 AWG wire
2. Fuse all positive connections
3. Connect to meter terminals
1. Negative
2. Power 7-60V DC (House)
3. Voltage Sense (VMTR+)
4. Do Not Use
5. Do Not Use
6. Do Not Use
4. Connect to source 1, 2, and 3
5. See meter operation manual
It is not possible within the scope of these instructions to fully acquaint
the installer with all the knowledge of electrical systems that may be
necessary to correctly install this product. If the installer is not
knowledgeable in electrical systems we recommend that an electrical
professional be retained to make the installation.
If either the panel front or back is to be exposed to water it must be
protected with a waterproof shield.
The panels must not be installed in explosive environments such as
gasoline engine rooms or battery compartments as the circuit breakers
are not ignition proof.
The main positive connection must be disconnected at the battery post
to avoid the possibility of a short circuit during the installation of this
distribution panel.
Guarantee
Any Blue Sea Systems product with which a customer is not satisÞ ed
may be returned for a refund or replacement at any time.
Useful Reference Books
Calder, Nigel, 1996: Boatowner’s Mechanical and Electrical Manual,
2nd edition, Blue Ridge Summit, PA: TAB Books, Inc.
Wing, Charlie, 1993: Boatowner’s Illustrated Handbook of Wiring,
Blue Ridge Summit, PA: TAB Books, Inc.