Blue Sea Systems 4303 WeatherDeck 12V DC Waterproof Switch Panel - 2 Position User Manual

Dc ac, Weatherdeck ® waterproof switch only panels, Installation

Advertising
background image

CAUTION symbol refers to a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

WARNING symbol refers to a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

Instructions

WeatherDeck® Waterproof Switch Only Panels

PN 4303 / PN 4305 / PN 4307 / PN 4309

Blue Sea Systems Inc.

p 360.738.8230

425 Sequoia Drive

f 360.734.4195

Bellingham, WA 98226 USA

[email protected]

www.bluesea.com

980800000 Rev.003

WARNING

CAUTION

Installation

GUARANTEE: Blue Sea Systems stands behind its products for as long

as you own them. Find detailed information at www.bluesea.com/about.

For customer service, call 800-222-7617.

Maximum Operating Voltage

24V DC

Maximum Operating Amperage 15A (per circuit)

Panel Cumulative Rating

30A (PN 4303)

45A (PN 4305, PN 4307, PN 4309)

Switch Rating

15A maximum

Material: Cover

UV Resistant Thermoplastic

Panel

UL-V0 Flame Resistant Thermoplastic

Regulatory

Waterproof IP67—Protected against immersion up to 1 meter for 30 minutes

Specifications

Specifications subject to change. See bluesea.com for additional information and specifications

For use where circuit protection is located off the panel

• Does not include circuit protection or backlighting
• Integrated switch guards reduce the risk of accidental switching
• Panels can be mounted in four different orientations
• Panel front rated waterproof IP67 when properly mounted with the
watertight mounting gasket
• UV stabilized weather-resistant faceplate snaps on and off providing
access to components and concealing mounting screws
• Square Format Label Set PN 4215 included

PN Positions

Voltage

Width

in (mm)

Height

in (mm)

Depth

in (mm)

Width

Mounting

Centers in (mm)

Height

Mounting

Centers in (mm)

4303

2

12V / 24V DC 3.88 (98.55)

2.60 (66.04)

2.50 (63.50)

3.31 (84.07)

2.04 (51.82)

4305

4

12V / 24V DC 3.88 (98.55) 4.30 (109.22) 2.50 (63.50)

3.31 (84.07)

3.74 (95.00)

4307

6

12V / 24V DC 3.88 (98.55) 6.00 (152.40) 2.50 (63.50)

3.31 (84.07)

5.44 (138.18)

4309

8

12V / 24V DC 3.88 (98.55) 7.70 (195.58) 2.50 (63.50)

3.31 (84.07)

7.14 (181.36)

DC

AC

1. Before beginning electrical installation, disconnect all AC and DC power sources.

2. Select mounting location and panel orientation away from flammable areas.

Panel can be mounted in any of the four orientations shown below.

WARNING

CAUTION

If you are not knowledgeable about electrical systems, consult an

electrical professional.

If the panel front is to be exposed to water, it must be properly sealed to the surface.

The included gasket must be in place and the panel screwed down securely.

Panel switches are not ignition proof—the panel must NOT be installed in an

explosive environment such as a gasoline engine room or battery compartment.

3. Cut opening with template provided.

WARNING

®

Advertising