Caron CRSY102 User Manual
Page 22
Advertising
CRSY102 Operations Manual
Rev G 1/31/2013
Page 22
6. Discard used UV lamp
7. Insert new UV lamp into lamp connector socket.
8. Install UV light housing cap (with attached new UV lamp) into UV light
housing.
9. Re-attach ground clip.
10. Install left side access panels. Place the panel bottom into groove and rotate
panels upward until latches catch.
11. If necessary, roll recirculator back into place. Be sure not to kink any tubing
lines.
12. Plug power cord in and turn recirculator on.
Follow local regulations for disposing lamps.
See separate ultraviolet light owner’s manual for
specific warnings and instructions.
Ground clip must be securely attached to UV light
housing to reduce risk of electrical shock.
Advertising