Document Outline

• NETWORK USER'S GUIDE
  • Table of Contents
  • 1 Introduction
    • Overview
    • Network features
      • Network printing
      • Management utilities
    • Types of network connections
      • Network connection example
        • Peer-to-Peer printing using TCP/IP
        • Network Shared printing
      • Wireless network connection examples (For HL-3070CW)
        • Connected to a computer with an access point on the network (Infrastructure mode)
        • Connected to a wireless capable computer without an access point on the network (Ad-hoc mode)
    • Protocols
      • TCP/IP protocols and functions
        • DHCP/BOOTP/RARP
        • APIPA
        • ARP
        • DNS client
        • NetBIOS name resolution
        • WINS
        • LPR/LPD
        • SMTP client
        • Custom Raw Port (default is Port9100)
        • IPP
        • mDNS
        • Telnet
        • SNMP
        • LLMNR
        • Web services
        • Web server (HTTP)
        • IPv6
      • Other Protocol
        • LLTD
  • 2 Configuring your machine for a network
    • Overview
    • IP addresses, subnet masks and gateways
      • IP address
        • How the IP address is assigned to your print server:
      • Subnet mask
      • Gateway (and router)
    • Step by step chart
    • Setting the IP address and subnet mask
      • Using the BRAdmin Light utility to configure your machine as a network printer
        • BRAdmin Light
        • How to configure your machine using the BRAdmin Light utility
      • Using the control panel to configure your machine for a network
      • Using other methods to configure your machine for a network
    • Changing the print server settings
      • Using the BRAdmin Light utility to change the print server settings
      • Using the BRAdmin Professional 3 utility to change the print server settings (For Windows®)
      • Using Web Based Management (web browser) to change the print server settings
      • Using the control panel to change the print server settings
      • Using other methods to change print server settings
  • 3 Configuring your machine for a wireless network (For HL-3070CW)
    • Overview
    • Wireless network terms and concepts
      • SSID (Service Set Identifier) and channels
        • SSID
        • Channels
      • Authentication and encryption
        • Authentication methods
        • Encryption methods
        • Network Key
    • Step by step chart for wireless network configuration
      • For Infrastructure mode
      • For Ad-hoc mode
    • Confirm your network environment
      • Connected to a computer with an access point in the network (Infrastructure mode)
      • Connected to a wireless capable computer without an access point in the network (Ad-hoc mode)
    • Confirm your wireless network setup method
      • Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network (Recommended)
        • Configuration temporarily using a network cable
      • Configuration using SES/WPS or AOSS from the control panel menu to configure your machine for a wireless network (Infrastructure mode only)
      • Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)
    • Configure your machine for a wireless network
      • Using the Brother installer application on the CD-ROM to configure your machine for a wireless network (Recommended)
      • Using SES/WPS or AOSS from the control panel menu to configure your machine for a wireless network
      • Using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network
  • 4 Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
    • Configuration in Infrastructure mode
      • Before configuring the wireless settings
      • Configure the wireless settings
    • Configuration in Infrastructure mode using SES/WPS or AOSS from the control panel menu (without network cable)
      • Before configuring the wireless settings
      • Configure the wireless settings
    • Configuration in Ad-hoc mode
      • Before configuring the wireless settings
      • Configure the wireless settings
    • Installing the printer driver
  • 5 Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
    • Configuration in Infrastructure mode
      • Before configuring the wireless settings
      • Configure the wireless settings
    • Configuration in Infrastructure mode using SES/WPS or AOSS from the control panel menu (without network cable)
      • Before configuring the wireless settings
      • Configure the wireless settings
    • Configuration in Ad-hoc mode
      • Before configuring the wireless settings
      • Configure the wireless settings
    • Installing the printer driver
  • 6 Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
    • Overview
    • How to configure your wireless machine, using SES/WPS or AOSS from the control panel menu
      • For Windows® users
      • For Macintosh users
  • 7 Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
    • Overview
    • How to configure your wireless machine, using the PIN Method of Wi-Fi Protected Setup
      • For Windows® users
      • For Macintosh users
  • 8 Control panel features
    • Overview
    • Network menu
      • TCP/IP
        • Boot Method
        • IP Address
        • Subnet Mask
        • Gateway
        • IP Boot Tries
        • APIPA
        • IPv6
      • Ethernet (wired network only)
      • Factory Reset
      • Set to Default (For HL-3070CW)
      • Wired Enable (For HL-3070CW wired network only)
      • WLAN Enable (For HL-3070CW wireless network only)
      • SES/WPS or AOSS (For HL-3070CW wireless network only)
      • WPS w/PIN Code (For HL-3070CW wireless network only)
      • WLAN Status (For HL-3070CW wireless network only)
    • Reset the network settings to the factory default
    • Printing the Network Configuration page
  • 9 Driver Deployment Wizard (Windows® only)
    • Overview
    • Connection methods
      • Peer-to-peer
      • Network Shared
      • Local Printer (USB)
    • How to install the Driver Deployment Wizard software
    • Using the Driver Deployment Wizard software
  • 10 Web Based Management
    • Overview
    • How to configure the print server settings using Web Based Management (web browser)
  • 11 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
    • Overview
    • Configuring the standard TCP/IP port
      • Printer driver not yet installed
        • For Windows Vista® and Windows Server® 2008
        • For Windows® 2000/XP and Windows Server® 2003
      • Printer driver already installed
    • Other sources of information
  • 12 Internet printing for Windows®
    • Overview
    • IPP printing for Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008
      • For Windows Vista® and Windows Server® 2008
      • For Windows® 2000/XP and Windows Server® 2003
      • Specifying a different URL
    • Other sources of information
  • 13 Network printing from Macintosh using the BR-Script 3 driver (For HL-3070CW)
    • Overview
    • How to choose the printer driver (TCP/IP)
  • 14 Security features
    • Overview
      • Security terms
      • Security protocols
      • Security methods for E-mail notification
    • Configuring the protocol settings
    • Managing your network printer securely
      • Secure Management using Web Based Management (web browser)
      • Secure Management using BRAdmin Professional 3 (for Windows®)
    • Secure Function Lock 2.0 (For HL-3070CW)
      • How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser)
        • Restricting PC print by PC user login name
        • Setting up public mode
        • Other features
    • Printing documents securely using IPPS
      • Specifying a different URL
    • Using E-mail notification with user authentication
    • Creating and installing a certificate
      • Creating and installing a self-signed certificate
        • How to create and install a self-signed certificate
        • How to install the self-signed certificate on your computer
      • Creating CSR and installing a certificate
        • How to create the CSR
        • How to install the certificate to your printer
      • Import and export the certificate and private key
        • How to import the certificate and private key
        • How to export the certificate and private key
  • 15 Troubleshooting
    • Overview
    • General problems
    • Network print software installation problems
    • Printing problems
    • Protocol-specific troubleshooting
      • Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 IPP troubleshooting
      • Web Based Management (web browser) troubleshooting (TCP/IP)
    • Wireless network troubleshooting (For HL-3070CW)
      • Wireless setup problems
      • Wireless connection problem
  • A Appendix
    • Using services
    • Other ways to set the IP address (For advanced users and administrators)
      • Using DHCP to configure the IP address
      • Using BOOTP to configure the IP address
      • Using RARP to configure the IP address
      • Using APIPA to configure the IP address
      • Using ARP to configure the IP address
      • Using the TELNET console to configure the IP address
      • Using the Brother Web BRAdmin server software for IIS to configure the IP address
    • Installation when using a Network Print Queue or Share
    • Installation when using Web Services (For Windows Vista® users)
  • B Appendix
    • Print server specifications
      • Ethernet wired network
      • Wireless network (for HL-3070CW)
    • Function table and factory default settings
  • C Appendix
    • Open Source Licensing Remarks
      • OpenSSL statements
        • OpenSSL License
        • Original SSLeay License
      • Part of the software embedded in this product is gSOAP software.
      • This product includes SNMP software from WestHawk Ltd.
  • Index