Comelit MT VIP SYSTEM - Manual (Page 31)

31
Programming buttons on external unit art. 4662C
The following example illustrates how to program a button on a Powercom external unit art. 4662C. The procedure also applies to devices which have already been
programmed and for which you wish to change the call address.
1. Connect your PC to a ViP system extension port using the network cable supplied with software art. 1449.
2. Start ViP Manager software art. 1449.
3. Click on the button
Scan.
4. Wait for the software to complete the system scan.
5. All devices connected to the system will appear in the left-hand column.
6. Press the button
Filter window to enable it.
7. Tick the option ViP address.