Comelit MT VIP SYSTEM - Manual (Page 39)

39
Programming the ViP code for Planux monitor art. 6202
The following example illustrates how to program the ViP code for a Planux monitor art. 6202 which has not yet been programmed (yellow icon). However, the
procedure also applies to devices which have already been programmed (green icon) or have conflicting addresses (red icon).
1. Connect your PC to a ViP system extension port using the network cable supplied with software art. 1449.
2. Start ViP Manager software art. 1449.
3. Click on the button
Scan.
4. Wait for the software to complete the system scan.
5. All devices connected to the system will appear in the left-hand column.
6. Press the button
Filter window to enable it.
7. Tick the option Mac address.