Comelit MT VIP SYSTEM - Manual (Page 35)

35
Programming additional button module art. 3337
1. Wire the modules and buttons (see VIP/001).
2. Power up the external unit, carry out steps (1-4).
1 2
4 3
Set the Module index code using
the dip switches, see table on
page 46.
Follow the procedure below for each module art. 3337 connected to the system.
3. Connect your PC to a ViP system extension port using the network cable supplied with software art. 1449.
4. Start ViP Manager software art. 1449.
5. Click on the button
Scan.
6. Wait for the software to complete the system scan.
7. All devices connected to the system will appear in the left-hand column.
8. Press the button
Filter window to enable it.
Make a note of the address which has just been set on module art. 3337 and the ViP address of the external unit to which it is
connected, as in the following example.
Art. 4662C ViP address Art. 3337 Module index
00000600 236