Comelit MT 1998VC - Manual (Page 36)

36
EN
MENU To enter the programming menus
Can be used to select the various menu options
Can be used to move the cursor in order to change the entered data
OK Confi rm the displayed information or data entered
CANC Delete the data entered
ESC Cancel the selected option and exit the programming menu
Switchboard display screens:
L P V ?P 14 :15 : 26
= 3 = 04 Mon 12 Mar 12
Programming keys and display
For several of the functions, the keypad can be used to enter both numbers and letters; this can be done by pressing the
same button several times, for example if you press key 2 several times, a, b, c, A – B - C - 2 will appear in succession.
key for entering symbols .,;:?!()
key for entering a dash
key for entering the + symbol
0
key for entering a space between characters
OK Confi rms the data entered
CANC
Deletes the data entered
Alphanumeric keypad
The main functions of the switchboard are as follows:
• call an internal unit
• receive calls from external units and transfer them to internal units as necessary
• receive routine or alarm calls from the internal units
• control external unit electric locks
• activate a relay
The porter switchboard also offers:
• DAY/NIGHT operation, which can only be used to enable switchboard functions in specifi c time bands
programmed by the user;
• a CALL LOG, in which the calls from internal units which could not be answered are stored;
• a DIRECTORY which can be programmed so as to identify the caller easily.
General description
12 6
1 10 2 3 4 7 8 9 5
1 A AUDIO mode
V VIDEO mode
2 DAY mode
NIGHT mode
3 indicates audio active
4
indicates “FollowMe” function active
5 time (hours:minutes:seconds)
6 day (Mon, Tue, etc.) and date (day/month/year)
7 ! the 2 switchboards confi gured are NOT compatible
? the switchboard has not yet detected the presence of the remote switchboard
8 P indicates that the switchboard is confi gured in parallel
S indicates that the switchboard is confi gured in series
9
fi xed indicates correct operation of the serial line
fl ashing indicates malfunctioning of the serial line
10 LM fl ashing indicates a short circuit on the riser line, the text is accompanied by a tone which sounds
repeatedly. The switchboard rejects any attempts to call or transfer calls to internal units; however, all
incoming calls from the external unit will be dealt with normally.
LP fl ashingindicates that the external unit is not connected
11 = 5 fl ashing indicates the number of unanswered calls in DAY and NIGHT mode
12 = 1 fl ashing indicates the number of alarms received and not implemented
11