Comelit MT 1998VC - Manual (Page 40)

40
EN
When the switchboard receives a call from an internal
unit and it is not dealt with in the space of 30 sec.
(operator momentarily absent or busy with another
conversation), this is automatically stored in the
Received calls menu.
The switchboard can log a maximum of 10
unsuccessful calls. The eleventh call replaces the
fi rst.
The display will show the number of the received calls
(e.g.
=3 fl ashing).
To call the internal units listed in the received
calls log, proceed as follows:
- press the MENU key and use the
keys to view
the Receivedcalls menu, press OK;
14 :15 : 26
= 3 Mon 12 Mar 12
• Settings
• Configurations
• Directory
• Received calls
• Alarms
- use the keys to view the View entry, press OK;
14 :15 : 26
Mon 12 Mar 12
• View
• Delete all
- the calls received and made are displayed in
chronological order, beginning with the most recent call
received; use the
keys to scroll through the list;
14:15:26
Mon 12 Mar 12
Caller Sergio Rossi
Code 012
Received Mon 12 Mar 12
At 13 : 15 : 11
Scroll
Call Menu
- press to call the displayed internal unit.
U6 How to call an internal unit listed in the
received calls log
14 :15 : 26
Mon 12 Mar 12
Intercom active
- hang up the handset.
Press CANC to reset an intercom call which has been
active for more than one minute.
If the internal unit does not accept the transferred
conversation, or when the system is busy, or if the
call has not taken place correctly, internal unit
(002) remains on hold;
14 :15 : 26
Mon 12 Mar 12
Internal on hold
- cut off communication with internal unit (003) and
press
to resume communication with internal
unit (002);
14 :15 : 26
Mon 12 Mar 12
Communicating with
002
- to end the conversation, hang up the handset.
CAUTION!
If the external unit calls the switchboard during
an intercom call between internal units which has
been underway for more than one minute, the
intercom call will be reset so that the switchboard
can deal with the incoming call.