Comelit MT 1998VC - Manual (Page 57)

57
EN
The system can be set to allow automatic passage
from DAY mode to NIGHT mode at specifi c times
which can be programmed by the user. Up to 4
TIMETABLES can be set, and switching mode will be
set for each on (Day or Night).
Example:
You want to confi gure the switchboard with the follow-
ing parameters:
07:00 - 12:00 Day mode operation
13:00 - 22:00 Day mode operation
14 :15 : 26
Mon 12 Mar 12
Swt1 07 : 00 Day
Swt2 12 : 00 Night
Swt3 13 : 00 Day
Swt4 22 : 00 Night
Esc Ok
- press the MENU key and use the keys to view
the Settings menu, press OK;
14 :15 : 26
Mon 12 Mar 12
• Settings
• Configurations
• Directory
• Received calls
• Alarms
- use the keys to view the Automatic switching
menu, press OK;
14 :15 : 26
Mon 12 Mar 12
• Time
• Skins
• Timers
• Daily mode
• Automatic switching
- the cursor will automatically be positioned on the
min. time for switching 1; decrease or increase the
value using
I10 - Set automatic switching
complete, select Enable and activate the whole
programming schedule using , to disable use ;
- press OK to confi rm the settings;
- press ESC repeatedly to return to the main screen. You can decide to organise the week by selecting
one of these 3 operating modes for each day:
• AUTO: the system passes from DAY mode to
NIGHT mode at the programmed times.
• NIGHT: the system is in this mode for the whole day.
• DAY: the system is in this mode for the whole day.
If the “auto” setting is selected, throughout the day
the operating mode will switch at pre-set times, on
the basis of the programming set in accordance
with paragraph “I10 - Set automatic switching” on
page 57.
To deactivate the function, press .
To activate it:
- press the MENU key and use the keys to
view the Settings menu, press OK;
14 :15 : 26
Mon 12 Mar 12
• Settings
• Configurations
• Directory
• Received calls
• Alarms
- use the keys to view the Daily mode menu,
press OK;
14 :15 : 26
Mon 12 Mar 12
• Date
• Time
• Skins
• Timers
• Daily mode
- use the keys to view the day to be set and
select night, day or auto mode using the keys;
14 :15 : 26
Mon 12 Mar 12
Enable Wed Night
Sun Night Thu Night
Mon Night Fri Night
Tue Night Sat Night
Esc
Ok
- once programming for each day of the week is
I9 - Set daily mode