Comelit MT 1998VC - Manual (Page 42)

42
EN
To call a main switchboard from a secondary
switchboard, press
.
When the handset of the main switchboard
called is lifted, it communicates with the secondary
switchboard, the maximum duration of the
conversation is equal to the audio time set on the
main switchboard (MENU/Settings/Timers/Audio-
min. 10 seconds, max. 90 seconds).
14:15:26
Mon 12 Mar 12
Communicating with
005 240
- to end the conversation, hang up the handset.
CAUTION!
When the secondary switchboard and main
switchboard are communicating with each other,
calls cannot be transferred or put on hold.
U8 How to call a main switchboard from a
secondary switchboard
When the main switchboard receives a call from the
secondary switchboard:
- the NAME of the secondary switchboard from which
the call is being made, if it is listed in the directory
(see “U17 How to enter a name in the directory”,
page 46), or the address of the switchboard making
the call (e.g. 005 240) is displayed;
14:15:26
Mon 12 Mar 12
Call from 005 240
005= indicates the “zone”
240= indicates the general switchboard ID
- to reject the call, press CANC;
- to answer the call coming from the secondary
switchboard, lift the handset;
- the main switchboard communicates with the
secondary switchboard, with a maximum
conversation time equal to the audio time set on the
main switchboard (MENU/Settings/Timers/Audio -
min. 10 seconds, max. 90 seconds);
14:15:26
Mon 12 Mar 12
Communicating with
005 240
- to end the conversation, hang up the handset.
CAUTION!
If the switchboard is busy or the switchboard
operator is momentarily absent and cannot
answer within 30 seconds, it will be added to
the call queue (see “U6 How to call an internal unit
listed in the received calls log”, page 40).
U9 How to answer a call made from the secondary
switchboard to the main switchboard