Comelit MT KIT 12 - Manual (Page 46)

GROUP S.P.A.
46 MT KIT 12
26 25 PROGRAMMING CALL TIMES DISPLAYING INFORMATION
Select the value you wish to modify using pushbuttons
and confirm your selection by pressing .
Enter the “Set call times” menu.
This menu can be used to modify:
• Awaiting response time: maximum time beyond which
communication will be terminated if there is no response.
• Talk time: duration of a conversation between an internal unit
and the porter module.
• Intercom talk time: duration of an intercom conversation.
• Shut-down delay: after a call, the amount of time before a relay
is activated to shut down the monitor.
From the installer menu (pushbutton 1), enter the
“Special settings” menu using and .
Enter the “Information” menu.
From the installer menu (pushbutton 1), enter the
“Special settings” menu using and .
Once you have completed the programming
procedures, disable the installer menu.
ENGLISH