Condux Winch Line Blower System - Manual (Page 20)

CONDUX WINCH LINE BLOWER 18
7. Screw threaded adapter into pipe until tight by hand. Use adjustable wrench and screw
threaded adapter one more full turn See Figure 7 & 8
8. Install winchline blower body onto the threaded adapter. Close winchline blower body
and secure by tighting the speedball handle securely, do not over tighten See Figure 9 and
Figure 10.
Fig. 7 Insert Threaded Adapter into Duct
Fig. 8 Insert Threaded Adapter into Duct