Condux Winch Line Blower System - Manual (Page 5)

CONDUX WINCH LINE BLOWER 3
Safe Operating Practices
All tools, materials and equipment manufactured and supplied by Condux International are
designed to only be used by trained craft personnel. The information in this manual is essential for
the safe use of the Condux Winch Line Blower.
Operating procedures and guidelines must be read and understood by all personnel prior to using
any tools, materials, or equipment from Condux International.
OPERATOR QUALIFICATIONS
a) Operator in charge of the Winch Line Blower and installation project must be
appropriately dressed.
b) Operator must also wear the necessary protective equipment such as gloves, boots,
helmet, etc.
c) Operator must carefully follow all advisements contained in the instruction manual.
d) Operator must have work area kept clean of obstacles that might inhibit a safe working
area.
Condux will not be held liable for any injury or damage to either persons or property resulting
from the misuse of Condux equipment.
!WARNING: The Condux Winch Line Blower must be properly installed as
instructed. Failure to properly install the Winch Line Blower could result in severe
personal injury or damage to existing cables or conduit in the utility service
access vault.
!CAUTION: The Winch Line Blower is designed for use only in PVC and
polyethylene conduit. It will not operate properly and may cause personal injury
or physical damage if used in fiberglass, steel, concrete or other types of non-
plastic conduits.
This users guide and safety manual is intended to familiarize operators with the use and safety
procedures of the Condux Winch Line Blower.
This manual should be kept available to all operating personnel.