Condux Gulfstream 200 Micro Fiber Blower - Manual (Page 11)

11
g. CoNNECT bATTERY PACk To bLowER
Attach power supply cable to blower unit and battery pack, tighten connections.
(See figure 9). Once you have the supply cable connected, install the battery in
battery pack as shown. (See figure 10).
h. PANEL LAYouT
A description of each of the buttons and displays for the Gulfstream 200 micro fiber
blower control box appears below. (See figure 11).
Sel/Res:
1. Push Sel/Res to toggle between distance, rate, and total
2. Hold sel/Res to reset the distance
units:
1. Toggles between US and Metric units for all modes
figure 9. Attach battery Pack
Cable to blower unit
figure 10. Install battery
figure 11. Panel Layout