Condux Gulfstream 200 Micro Fiber Blower User Manual
Page 9
9
C. INSTALL CAbLE SEAL & mICRo fIbER IN DuCT PACk
Install the appropriate cable seal on the micro fiber. Make sure orientation of seal on
fiber is correct so that it will seat in the duct pack properly. (See figure 1).
Once the cable seal is positioned properly on the micro fiber, install the cable seal in
the bottom half of the appropriate duct pack. (See figure 2).
Note: The bottom half of the duct pack is designated by a small hole on the
outside of the unit.
D. INSTALL mICRo DuCT
After the cable seal and micro fiber are in place, position the micro duct properly in
the bottom half of the duct pack. (See figure 3).
Once the micro duct is in place, secure the configuration by installing the top half of
the duct pack and pressing firmly together. (See figure 4).
figure 1. Install micro fiber in
Cable Seal
figure 1. Install Cable Seal in
bottom half of Duct Pack
figure 3. Position micro Duct
Properly in Duct Pack
figure 4. Install Top half of Duct
Pack and Press Together