Maintenance – Condux Gulfstream 200 Micro Fiber Blower User Manual
Page 16
16
9.
Maintenance
A. TRACk CLEANINg AND TIghTENINg
1. Inspect track before and after each use.
2. Clean after each use, or when necessary. Remove the top assembly to clean
thoroughly by:
• Unscrewing tractor down screw all the way
• Separating the two halves – note parts being disassembled to ease
reassembly
b. REPLACEmENT of ThE DRIVE bELT
The drive belts need to be replaced when the machine is unable to tractor drive the
specified range of cable diameters. Only genuine spares should be used otherwise the
machine may be unsafe and void warranty.
1. Remove front cover plate and plastic guard from top half assembly
(See figure 19).
Procedure
Daily
weekly
monthly
60 Days
90 Days
Clean all assemblies and
components thoroughly
X
X
X
X
X
Inspect fasteners and screws
X
X
X
X
X
Check Belt Tension. Replace if
excess wear has occured
X
X
X
X
X
figure 19. Remove front Cover Plate