CounterPath X-Lite 3.0 User Guide User Manual
Page 41
CounterPath X-Lite 3.0
39
Table 6: Options – Advanced – Network
Field
Description
Network Connection Speed
Complete this field only after disabling zero touch bandwidth detection (see
Table 3 on
Select the network connection type for the computer on which X-Lite is running.
Preserve bandwidth during silence periods
When this feature is enabled, X-Lite stops transmitting audio whenever the user
stops talking.
When this feature is disabled, X-Lite always transmits audio, which uses more
bandwidth but may result in better
call quality.
Typically disabled (enable if using a slow connection).
Call Inactivity
When this feature is enabled, X-Lite automatically hangs up a call when it
detects a specified period of inactivity. If a user is on a call that gets disconnected
because of network problems (rather than because of one of the parties hanging
up), X-Lite will end the call after the specified period of time.
Typically on. This feature may be turned off if, for example, a PBX server
already handles inactivity issues.