Despatch RBC1-50 with Protocol Plus - Manual (Page 20)

16
Power Connection
Be sure the oven is connected to the power source
shown on the nameplate. Connect the oven directly
to your electric supply, with all grounding and safety
equipment, according to applicable codes, ordinances
and accepted safe practices.
Line voltages may vary in some geographical
locations. If your line voltage is much lower than the
oven voltage rating, the warm up time will be longer
and the motors may overload or run hot. If the line
voltage varies more than ±10% from the oven voltage
rating, the temperature control may operate
erratically.
WARNING:
Failure to read this warning
can result in death, serious
bodily injury or property
damage. All conductors must
be copper unless the specific
terminal is marked for use with
aluminum conductors.
WARNING:
All grounding and safety
equipment must be in
compliance with applicable
codes, ordinances and
accepted safe practices.