Despatch RBC1-50 with Protocol Plus - Manual (Page 5)

1
PREFACE
This manual is your guide to the Despatch oven. It is organized to give you the
information you need quickly and easily.
The INTRODUCTION section provides an overview of
the Despatch oven.
The THEORY OF OPERATION section details the
function and operation of assemblies and
subassemblies on the Despatch oven.
The INSTRUCTIONS section provides directions on
unpacking, installing, operating and maintaining the
Despatch oven.
The APPENDIX section contains special instructions
on air atmosphere and nitrogen atmosphere Burn-In
ovens, a Troubleshooting Table, a list of Accessories
and a Warranty.
Refer to the manufacturer’s manual for instructions on the use of the controls.
The parts are listed in the corner of the prints, the electrical items on the electrical print
and the mechanical items on the mechanical prints.
An efficient way to learn about the oven would be to read the manual while working with
the corresponding oven control system. This will give you practical hands-on
experience with information in the manual and the oven.
Before operating the equipment, be sure you understand all of the technical information
contained in this manual. Information skipped, not understood or misunderstood could
create the possibility of operating the equipment in an unsafe manner. This can cause
damage to the oven or personnel or reduce the efficiency of the equipment.
NOTE:
Read the entire
INTRODUCTION and THEORY
OF OPERATION before
installing the oven.
WARNING:
Failure to heed warnings in this
instruction manual and on the
oven could result in personal
injury, property damage or
death.