5 example 5, 6 example 6, 7 example 7 – Black Box LR1102A-T1/E1 User Manual
Page 17: 8 example 8, 9 example 9, 10 example 10, 11 example 11, 12 example 12, 13 example 13
IGMP Configuration
19
Blackbox/configure/ip/igmp/interface ethernet0> ip igmp ignore-v2-messages
Blackbox/configure/ip/igmp/interface ethernet0> exit 3
Blackbox/configure>
2.1.2.5 Example 5
The following example configures the Last Member Query Count to be 4 on ethernet 0.
Blackbox/configure/ip/igmp/interface ethernet0> last-member-query-count 4
2.1.2.6 Example 6
In the following example for interface ethernet 0, the Robustness is configured to be 4. The Last Member Query count is
configured to be 5.
Blackbox/configure/ip/igmp/interface ethernet0> robustness 4
Blackbox/configure/ip/igmp/interface ethernet0> last-member-query-count 5
Blackbox/configure/ip/igmp/interface ethernet0> exit 3
Blackbox/configure>
2.1.2.7 Example 7
The following example configures ethernet 0 with the default Last Member Query Interval of 2000 milliseconds (20 seconds).
Blackbox/configure/ip/igmp/interface ethernet0> last-member-query-interval 2000
2.1.2.8 Example 8
The following example configures ethernet 0 with the default Query Interval to be 200 seconds.
Blackbox/configure/ip/igmp/interface ethernet0> query-interval 200
2.1.2.9 Example 9
The following example configures the default Query Response Interval to be 10 seconds (or 100 deciseconds) for ethernet 0.
Blackbox/configure/ip/igmp/interface ethernet0> query-response-time 100
2.1.2.10Example 10
The following example turns require-router-alert on for interface ethernet 0.
Blackbox/configure/ip/igmp/interface ethernet0> require-router-alert
2.1.2.11Example 11
The following example configures the default Robustness to be 3 for interface ethernet 0.
Blackbox/configure/ip/igmp/interface ethernet0> ip igmp robustness 3
2.1.2.12Example 12
The following example turns the send-router-alert option off for interface ethernet 1.
Blackbox/configure/ip/igmp/interface ethernet1> no send-router-alert
2.1.2.13Example 13
The following example configures IGMP version 2 to run on interface ethernet 0.
Blackbox/configure/ip/igmp/interface ethernet0> version 2
Blackbox/configure/ip/igmp/interface ethernet0> exit 3
Blackbox/configure>