Configuring open shortest path first routing, 1 ospf routing protocol, 1 configuring the host name – Black Box LR1102A-T1/E1 User Manual
Page 97: 2 configuring interface ethernet 0, 3 configuring interface bundle dallas, Onfiguring, Hortest, Irst, Outing, Ospf routing protocol
17
C
ONFIGURING
O
PEN
S
HORTEST
P
ATH
F
IRST
R
OUTING
17.1 OSPF Routing Protocol
The following example shows a Black Box LR1114A connected to a router over a single T1 link. IP addresses 10.10.10.0,
20.20.20.0, and 30.30.30.0 are assigned to area 760.
Figure 33 Configuring OSPF Between a Black Box LR1114A System and a Router
17.1.1Configuring the host name
Blackbox> configure terminal
Blackbox/configure> hostname LR1114A
17.1.2Configuring interface ethernet 0
LR1114A/configure> interface ethernet 0
LR1114A/configure/interface/ethernet 0> ip address 10.10.10.1 24
LR1114A/configure/interface/ethernet 0> exit
17.1.3Configuring interface bundle Dallas
LR1114A/configure> interface bundle Dallas
LR1114A/configure/interface/bundle Dallas> link t1 1
LR1114A/configure/interface/bundle Dallas> encapsulation ppp
LR1114A/configure/interface/bundle Dallas> ip address 20.20.20.1 24
LR1114A/configure/interface/bundle Dallas> exit
Tiara 1400
Router
20.20.20.0/24
.2
.1
30.30.30.0/24
10.10.10.0/24
Area 760
.1
T1 PPP
.1
LR1114A