Networking with routing information protocol, 1 routing information protocol, 2 displaying rip configuration – Black Box LR1102A-T1/E1 User Manual
Page 93: 3 displaying all configured rip interfaces, Etworking, With, Outing, Nformation, Rotocol, Routing information protocol
15
N
ETWORKING
WITH
R
OUTING
I
NFORMATION
P
ROTOCOL
15.1Routing Information Protocol
15.1.1Configuring RIP for Ethernet 0 and WAN 1 Interfaces
LR1114A> configure terminal
LR1114A/configure> router rip
LR1114A/configure/router rip> interface ethernet0
LR1114A/configure/router rip/interface ethernet0> exit
LR1114A/configure/router rip> interface wan1
LR1114A/configure/router rip> exit
15.1.2Displaying RIP Configuration
Execute show ip rip global to display RIP configuration information
Figure 30 show ip rip global Command
15.1.3Displaying All Configured RIP Interfaces
Execute show ip rip interface all to display information about all configured RIP interfaces.
> show ip rip global
Router RIP is enabled
Mode: RIP 2
Distance: 100
Default Metric: 1
Timers:
Update: 30 seconds
Holddown: 120 seconds
Flush: 180 seconds