Black Box LR1102A-T1/E1 - Manual (Page 50)

Black Box LR11xx Series Router Configurations Guide
52
Figure 13 Proxy ARP and Packet Forwarding
1 Router 1 broadcasts an ARP request for 200.1.1.1.
2 Black Box 1 recognizes that router 200.1.1.1 is reachable via its WAN interface, based on a configured IP
route.
3 Black Box 1 Proxy ARPs, responding with the MAC address mapped to bundle WAN1.
4 Router 1 unicasts the ping echo request to that MAC address.
5 Black Box 1 forwards the echo request for 200.1.1.1 through the WAN1 bundle.
6 Black Box 2 receives a packet on WAN2 and forwards it to directly connected router 2.
7 The echo reply from router 2 to router 1 is returned in the same manner.
6.1.3 Addressing in IP Multiplexing Networks
IP addressing in an IP Multiplexing design must take into account the fact that the router on the LAN must see the remote
router as residing on the same LAN or IP network. There are a number of addressing schemes that can fulfill this
requirement, including:
„ Single subnet
„ Split subnet
„ Secondary addressing
Consider the following network, consisting of three remote sites. Two remote sites utilize Black Box equipment,
while the third is a simple router/dsu combination. Five IP addressing schemes are provided below, all refer to the
following network.
Figure 14 Addressing in IP Multiplexing Networks
Tasman 1
e0: 200.1.1.3/29 Tasman 2
e0: 200.1.1.2/29
wan
Router 1
e0: 200.1.1.4/29
Router 2
e0: 200.1.1.1/29
Black Box 1 Black Box 2
Router 1
Router 2
POP Router
Router/DSU
e1
e0
e0
e0
e0
e0
e0
s0
e1
e0
POP Tasman
Tasman 1
Tasman 2
wan 1
wan 2
wan 3
Black Box 1
Black Box 2