Black Box LR1102A-T1/E1 User Manual

Page 37

Advertising
background image

Example 4: IPSec remote access

39

Black Box1/configure> firewall internet

Black Box1/configure/firewall internet> policy 1000 in service ike self

Black Box1/configure/firewall internet/policy 1000 in> exit

Black Box1/configure/firewall internet> exit

Step 12: Display firewall policies in the internet map (applicable only if firewall license is enabled)

Black Box1> show firewall policy internet

Advanced: S - Self Traffic, F - Ftp-Filter, H - Http-Filter,

R - Rpc-Filter, N - Nat-Ip/Nat-Pool, L - Logging,

E - Policy Enabled, M - Smtp-Filter

Pri Dir Source Addr Destination Addr Sport Dport Proto Action Advanced

--- --- ----------- ---------------- ----------------- ------ --------

1000 in any any ike PERMIT SE

1024 out any any any any any PERMIT SE

Step 13: Display firewall policies in the internet map in detail (applicable only if firewall license is enabled)

Black Box1> show firewall policy internet detail

Policy with Priority 1000 is enabled, Direction is inbound

Action permit, Traffic is self

Logging is disable

Source Address is any, Dest Address is any

Source Port is any, Service Name is ike

Schedule is disabled, Ftp-Filter is disabled

Smtp-Filter is disabled, Http-Filter is disabled

Rpc-Filter is disabled, Nat is disabled

Bytes In 0, Bytes Out 0

Policy with Priority 1024 is enabled, Direction is outbound

Action permit, Traffic is self

Logging is disable

Source Address is any, Dest Address is any

Source Port is any, Dest Port is any, any

Schedule is disabled, Ftp-Filter is disabled

Smtp-Filter is disabled, Http-Filter is disabled

Rpc-Filter is disabled, Nat is disabled

Bytes In 0, Bytes Out 0

Step 14: Configure firewall policies for a group of mobile users to allow access to the local LAN (applicable only if firewall license is

enabled)

Black Box1/configure/firewall corp>

Black Box1/configure/firewall corp> policy 1000 in user-group sales address any any 10.0.1.0

24

Black Box1/configure/firewall corp/policy 1000 in

>exit

Black Box1/configure/firewall corp>

Step 15: Display firewall policies in the corp map (applicable only if firewall license is enabled)

Advertising
This manual is related to the following products: