B single-phase direct-to-mains connection topology – ElmoMC ExtrIQ Gold Line Servo Drives-Gold Panther User Manual
Page 29
Advertising
Gold Panther Installation Guide
MAN-G-PANIG-EC (Ver. 1.000)
|Main Power, Motor Power and Auxiliary Power
29
5.1.2.1.b
Single-Phase Direct-to-Mains Connection Topology
Figure 7: Non-Isolated Single-Phase Connection Topology
The Power Supply is connected directly to the mains AC line.
Warning:
•
Do not connect VN- to PE. In a direct-to-mains connection the VN- must not be
connected to the PE, as this will cause irreparable damage to the system.
•
Take care and note that in a direct-to-mains connection the Neutral point is not
the most negative voltage level. It is the mid-point level of the rectified DC bus.
Advertising