Chapter 7: heat dissipation, Gold panther thermal data, Heat dissipation data – ElmoMC ExtrIQ Gold Line Servo Drives-Gold Panther User Manual
Page 61: Chapter 7, Heat dissipation
Gold Panther Installation Guide
MAN-G-PANIG-EC (Ver. 1.000)
|Gold Panther Thermal Data
61
Chapter 7:
Heat Dissipation
The best way to dissipate heat from the Gold Panther is to mount it so that its heat-sink faces up.
For best results leave approximately 10 mm of space between the Gold Panther‘s heat-sink and any
other assembly.
7.1. Gold Panther Thermal Data
•
Heat dissipation capability (θ): approximately 5.5 °C/W
•
Thermal time constant: approximately 600 seconds (thermal time constant means that the Gold
Panther will reach 2/3 of its final temperature after 10 minutes)
•
Shut-off temperature: 86 °C to 88 °C (measured on the heat-sink)
7.2. Heat Dissipation Data
Heat Dissipation is shown graphically below:
Figure 33: Dissipation versus Current Graph for 560 and 680 VDC