ElmoMC ExtrIQ Gold Line Servo Drives-Gold Panther - Manual (Page 51)

Gold Panther Installation Guide
MAN-G-PANIG-EC (Ver. 1.000)
|User I/Os| www.elmomc.com
51
Table of Contents
5.4.3. Input (J2)
An analog user input can be configured by software to be used as either tachometer velocity sensor
input or potentiometer position feedback.
Pin (J2) Signal Function
22 ANALOG1+ Analog input 1+
24 ANALOG1- Analog input 1-
20 ANLRET Analog ground
Table 17: Analog Input Pin Assignment
Figure 26: Analog Input with Single-Ended Source