ETC Selador Series CE - Manual (Page 11)

6
Document Conventions
Throughout this manual, the following are used to alert you to notes and safety notices.
N o t e :
Notes are helpful hints and information that is supplemental to the main text.
C A U T I O N :
A Caution statement indicates situations where there may be undefined or
unwanted consequences of an action, potential for data loss or an equipment
problem.
W A R N I N G :
A Warning statement indicates situations where damage may occur,
people may be harmed, or there are serious or dangerous consequences
of an action.
W A R N I N G : RISK OF ELECTRIC SHOCK! This warning statement indicates situations
where there is a risk of electric shock.
Safety
The Selador series fixtures are intended for professional use only. Read entire User
Manual before using equipment.
Please note the following safety notices before use:
W A R N I N G : Note the following safety warnings before use:
• Do not mount the Selador series fixture on or near a flammable surface.
• Use the fixture in dry locations only, where humidity does not exceed 90 percent (non-
condensing). Fixture is not intended for outdoor use.
• Mount and support the fixture only by the primary suspension holes in the enclosure.
• Suspend the fixture from a suitable structure using only the hardware rated for the
weight of the fixture.
• In addition to primary suspension, attach a safety cable to the fixture housing.
Appropriate attachment points (holes) are provided in the protruding tabs on either end
of the fixture housing.
• Disconnect the unit from power and from DMX before all cleaning and maintenance.
• Maximum ambient temperature: Ta=40°C
• Maximum exterior surface temperature: Tmax=80°C
• External Temperature after 5 minutes of full-brightness operation and 23°C ambient:
38°C
• External Temperature (steady state achieved) at 23°C: 70°C