EUCHNER RPS - Manual (Page 12)

Operating Instructions for Rope Pull Switches
RPS...
Technical data
Version
RPS… RPS-M…
Electrical data (refers to the switch without plug connector)
Rated insulation voltage U
i
250 V
Rated operating voltage U
e
240 V
Rated impulse withstand voltage U
imp
2.5 kV
Continuous thermal current I
the
10 A
Utilization category AC 15; 230 V/ 3 A AC 15; 240 V/ 3 A
DC 13; 250 V/ 0.27 A
Short circuit protection 6 A gG acc. to IEC 60269-1
Safety class II I
Positively driven NC contacts IEC/ EN 60947-5-1, Appendix K
Pre-failure monitoring RPS-M-E…
Rated operating voltage U
e
10-30 V/DC
Rated operating current I
e
50 mA
Utilization category DC 13
Short circuit protection Yes
Reverse polarity protection Yes
Connection Screw terminal, 3-pin
= 1.5 mm²
Mechanical data
Housing/cover
PA 6 GV (UL94-VO) die-cast aluminum
Emergency stop PA, glass-fiber reinforced
Actuation Die-cast zinc/steel
Ambient temperature -25°C to +70°C -30°C to +80°C
Contact opening gap > 2 x 2 mm
Mechanical life acc. to IEC 60947-5-5 1 x 10 5 operating cycles
Switching frequency ≤ 20/min.
Latching device acc. to EN 60947-5-5, DIN EN 418
Emergency stop reset RPS...SC : By turning the RESET actuating cylinder
RPS...PR/PC: By pulling the blue RESET button
Rope length acc. to type L
max
= 75 m / 37.5 m / 25 m ( observe Table 3 )
Rope  D =  2 - 5 mm
Rope attachment
RPS...SC/PC... Fast-action clamping device / PR... by
means of ring
Connection
8 x x cage pull springs 0.08
... 1.5 mm² flex.
8 screw terminals (М3.5)
Cable entry 3 x M20x1.5
Mounting 4 x M5 4 x M5 or 4 x M6
Weight Approx. 0.65 kg Approx. 1.0 kg
Degree of protection IP67 acc. to EN 60529
Regulations EN 60947-1, EN 60947-5-1, EN 60947-5-5, EN ISO 13850
EC conformity See enclosed Declaration of Conformity
Approvals c CSA us / BG
12