EZWatch CMS software for TurboView - Manual (Page 36)

36
Transparency
 The Transparency menu will allow user to alpha-blending of OSD menu on the monitor. Transparency is the quality that an
object or substance has when user can see through it.
 Transparency range is between 0 and 100; with a larger number representing can see through it. (default 0)
 While pressing (+) or (-) button, a target value increases or decreases by 10 units.
4.3.2 Main Monitor
 Please click ( ) DISPLAY>Main Monitor and the following screen will appear.
 The Main Monitor menu will allow user to adjust channel sequencing interval of Main monitor.
 Adjust interval for ‘Full screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 Use only with 8 / 16 channel DVRs.
 Adjust interval for ‘X4 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘4 Split Screen sequencing’ is disabled in the following modes.
- 8 channel DVR: 3x3 Mode
- 16 channel DVR: 4x4 Mode
 Use only with 16 channel DVR.
 Adjust interval for ‘X9 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘9 Split Screen sequencing’ is disabled in 4X4 Mode.
4.3.3 Spot Monitor
 Please click ( ) DISPLAY>Spot Monitor and the following screen will appear.
X9 Seq
Quad Seq
Full Seq