EZWatch CMS software for TurboView - Manual (Page 79)

79
8.5 Health Check
 This function allows user to check operating status of each unit in DVR connected to CMS.
 Click on Health Check button in Watch mode and the following screen will appear.
 The list below describes functions of each part of the screen.
1 CMS connections (up to 4)
2 Camera connections and operating status
3 HDD connection and its operating status
4 Recording status
5 Motion recording status
6 Alarm In connection and operating status
7 Alarm Out connection and operating status
8 Version
9 Recording start/end date and time
8.5.1 Camera connections and Operating Status
 Camera is in normal operation.
 Camera is not in use.
 Camera is not connected or Video Loss.
 Camera is Covert status.
8.5.2 HDD connections and Operating Status
 Camera is in normal operation.
 HDD is not connected (up to 4).
 HDD has an error.
⑥
④
⑤
⑦
② ③
①