EZWatch CMS software for TurboView - Manual (Page 65)

65
5.7 Menu Bar
 Menu bar enables users to control all function as front button on the OSD screen.
 Move the mouse cursor to bottom around Date and Time indication then Menu bar will show up on the live screen.
 Each icon functions as below;
: Exit the Menu Bar
: Safely turn off the DVR
: Enter Archive mode
: Enter PTZ control mode
: Enter Setup mode
: Turn the display as 1 channel full screen. Additional click on full screen, it will change to next channel in sequence.
: Turn the display as 4 channels split screen, Additional click on quad-screen, it will change to the next four channels in
sequence.
: Turn the display as 8 channels split screen, Additional click on 8 channels split screen, it will change to the next eight
channels in sequence.
: Turn the display as 16 channels split screen, There is no changes when additional click on 16 channels split screen.
: Activate the Sequence as configured on spot monitor Setup menu.
: Displayed channel on Spot monitor 1 can be changed by clicking the wanted channel. Sequence stops at “SP1”
mode.
: Displayed channel on Spot monitor 2 can be changed by clicking the wanted channel. Sequence stops at “SP2”
mode.
: Displayed channel on Spot monitor 3 can be changed by clicking the wanted channel. Sequence stops at “SP3”
mode.
: Select the multisport split mode by clicking MS and 1/4/9/16 buttons.
: Do not activate spot.
: Play Instant Playback
: Enter Calendar Search
: Date and Time Search
: Enter Event Search
: Showing current Date & Time