3 pre alarm – EZWatch CMS software for TurboView User Manual

Page 51

Advertising
background image

51

Motion / Alarm In / Continuous

Motion / Alarm In / Pre-Alarm

Choose ‘OK’ to confirm the setting.

(NOTE)
Holiday (H) registration is done with a separate menu.

4.5.3 Pre

Alarm

A, B, C, D and E Type

Please ( ) RECORD>Pre Alarm and the following will appear.

Pre Alarm is effectively used when user selected recording mode by Alarm or Motion.

The Pre Alarm will allow user to check, during playback, the previously recorded video before the record start time.

Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles

here.

Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one

of 720x480, 720x240 and 360x240. (NTSC)

Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by

camera. Below lists the maximum recording rate of each camera.

A and B Type

NTSC(PAL)

360x240 (360x288)

720x240 (720x288)

720x480 (720x576)

4 Channel DVR

120 (100)

120 (100)

60 (50)

8 Channel DVR

240 (200)

120 (100)

60 (50)

16 Channel DVR

480 (400)

240 (200)

120 (100)

C and D Type

NTSC(PAL)

360x240 (360x288)

720x240 (720x288)

720x480 (720x576)

4 Channel DVR

120 (100)

120 (100)

120 (100)

8 Channel DVR

240 (200)

240 (200)

120 (100)

16 Channel DVR

480 (400)

240 (200)

120 (100)

E Type

NTSC(PAL)

360x240 (360x288)

720x240 (720x288)

720x480 (720x576)

8 Channel DVR

240 (200)

240 (200)

240 (200)

16 Channel DVR

480 (400)

480 (400)

480 (400)

Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select one of

Super, High and Std.

Click ( ) each frame on Duration column to select recording duration (i.e., 1 second ~ 3 hours) of a corresponding camera.

Choose ‘OK’ to confirm the setting.


Advertising