EZWatch CMS software for TurboView - Manual (Page 53)

53
- Exit: ignore the new settings and go back to previous menu (page).
- Cancel: cancel Motion Setup menu.
 Choose ‘OK’ to confirm the setting.
4.5.5 Holiday
 Please click ( ) RECORD>Holiday and the following screen will appear.
 The Holiday menu will allow user to register holidays. Please follow the registration procedure below.
① Use arrow buttons in the Month Calendar to select Year and Month of holiday to be registered.
- : search subsequent ‘Year’
- : search previous ‘Year’
- : search subsequent ‘Month’
- : search previous ‘Month’
② Click ( ) on date user need to register as holiday.
③ Click ( ) ADD button and the date just clicked on will be copied to the Schedule frame for registration.
④ If wish to cancel the registration of a certain holiday, please click  button next to the Schedule frame.
 Since holidays may vary every year, we recommend user to update on a regular basis.
 Choose ‘OK’ to confirm the setting.
4.6 LINK
 Please click ( ) LINK and the following screen will appear.
 The LINK menu will allow user to set recording modes of all kinds of alarms (Sensor, Motion Event, Video loss, System
Event, etc.), alarm output, e-mail notification and the like.
4.6.1 Alarm In
 Please click ( ) LINK>Alarm In and the following screen will appear.
 Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
 Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
 Please follow the setup procedures below.
① Click ( ) Alarm In frame and select Alarm In 1.
② Select cameras for recording when Alarm In 1 is on. Please check  a check box under Link Camera. More than two