EZWatch CMS software for TurboView - Manual (Page 52)

52
F Type
 Please ( ) RECORD>Pre Alarm and the following will appear.
 Pre Alarm is effectively used when user selected recording mode by Alarm or Motion.
 The Pre Alarm will allow user to check, during playback, the previously recorded video before the record start time.
 Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles
here.
 Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select its
resolution from 360x 240(288), 720x240(288), 720x480(576), 1280x720 and 1920x1080.
 Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
4 Channel DVR 120(100) 120(100) 120(100) 120(100) 120(100)
 Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select its recording
quality from Super, High and Std.
 Click ( ) each frame on Duration column to select recording duration (i.e., 1 second ~ 3 hours) of a corresponding camera.
 Choose ‘OK’ to confirm the setting.
4.5.4 Motion Detection
 Please click ( ) RECORD>Motion Detection and the following screen will appear.
 The Motion Detection menu will allow user to set Motion detection alarm.
 Press SETUP key (or right mouse button) and the SETUP menu will appear.
 SETUP menu descriptions.
- Camera: select camera for setup.
- Sensitivity: select sensitivity (Low, Normal and High)
- Reverse Vert: activate the entire column at the cursor’s position.
- Reverse Horz: activate the entire row at the cursor’s position.
- Select All: active all blocks.
- Deselect All: deactivate all blocks.
- Copy to All Cameras: The present channel setup applies to all other cameras. Only when click save button, the changed
setup can be saved.
- Save: save the new settings and go back to previous menu (page).