GeoDesy FSO GD series - Manual (Page 16)

com
http://www.geodesy-fso.com
16
GeoDesy Kft. Telefon: 06-1-481-2050
H-1116 Budapest, Kondorfa str. 6-8. Fax.: 06-1-481-2049
E-mail: info@geodesy-fso.
3 Product grouping by interface type
3.1 100Mbps TP interface
The
GeoDesy-FSO TP series products are designed to provide easy-to-use and
cost-effective solution for interconnecting Local Area Networks. By utilizing standard
Category 5 cable and using standard 100BaseTX interface the deployment of the
system is easier than ever. The transparent and wire speed data transfer together
with virtually zero latency assures the easy integration of the system in all
environments.
The
TP systems should be considered as repeaters in the network. So the
installation distance between the head and the network device is 100m. The
distance on a back to back site is maximum 5 meters, between the heads.
The TP system layout
The head needs a power and data cable, which is connected to the ODIU (Outdoor
Interconnection Unit). The required power for the outdoor unit is 230VAC or
115VAC, depending on the order. Please note that the transformer is not a switching
mode power supply, so has to be configured for the proper voltage before
connection, this has to done before shipment. The heads are fixed 100Mbps and are
auto-negotiating.