HiRO H50113 V92 56K - Manual (Page 25)

Hiro H50113
24
Command Function
E0 Disables echo command.
E1 Enables echo command (default).
B<value>—Communication Standard Setting
Use this command to select the communication standard used by
the soft modem.
Result codes:
_
OK if <value> = 0—3, 15, 16.
_
ERROR if <value>
≠0—3, 15, 16.
Command Function
B0 Selects CCITT V.22 mode when the modem is at
1200 bits/s.
B1 Selects Bell 212A when the modem is at 1200
bits/s (default).
B2 Deselects V.23 reverse channel (same as B3).
B3 Deselects V.23 reverse channel (same as B2).
B15 Selects V.21 when the modem is at 300 bits/s.
B16 Selects Bell 103J when the modem is at 300
bits/s (default).