5 crystal snatcher, 6 crystalsix, Atcher (see – INFICON XTC/C Thin Film Deposition Controller User Manual
Page 165
Advertising
6 - 17
IP
N 07
4-
18
3X
XTC/C - XTC/2 Operating Manual
6.4.5 Crystal Snatcher
To use the crystal snatcher supplied with the sensor follow the instructions
below:
1
Insert crystal snatcher into ceramic retainer (1) and apply a small amount of
pressure. This locks the retainer to the snatcher and allows the retainer to
be pulled straight out (2).
2
Re-insert the retainer into the holder after the crystal has been changed.
3
Release the crystal snatcher with a slight side-to-side motion.
Figure 6-6 Use of Crystal Snatcher
6.4.6 CrystalSix
See the manual (IPN 074-155) for specific instructions for this device.
Advertising
This manual is related to the following products: