2 configuration switches 1 & 2, Caution – INFICON XTC/C Thin Film Deposition Controller User Manual
Page 47
Advertising
2 - 19
IP
N 07
4-
18
3X
XTC/C - XTC/2 Operating Manual
2.6.2 Configuration Switches 1 & 2
Two eight position DIP switches used to customize the instrument as follows.
Figure 2-12 Configuration Switch
CAUTION
The configuration switches are only read on
instrument power up. If an option is changed, the
instrument must be switched to standby and then
powered up.
Advertising
This manual is related to the following products: