INFICON HPG400-SD ATM to Ultra-High Vacuum Gauge (DeviceNet) - Manual (Page 15)

tira03e1-b (0310) BPG/HPG400-SDv1.cp
15
This attribute contains the position of the hot cathode sensor calibration switch
(
→  6).
This attribute contains the position of the Emission On threshold switch ( →  6).
Depending on the value of the data type attribute, this attribute is INT or REAL
value.
Position of the
"Emission On"
Switch (P ↔HP)
Emission on
threshold
[mBar]
Emission on
threshold
[Torr]
Emission on
threshold
[Pa]
Emission on
threshold
[Counts]
0 or 1 1 0.75006168 100 28333.2625
2 or 3 0.5 3.75031×10 -1 50 28132.57634
4 or 5 0.2 1.50012×10 -1 20 27867.2837
6 or 7 0.1 7.50062×10 -2 10 27666.5975
8 or 9 0.05 3.75031×10 -2 5 27465.9113
Sensitivity
(Only HPG400-SD)
Emission On Threshold
(Only HPG400-SD)