JULABO FCW1600_1600S Recirculating coolers - Manual (Page 21)

Recirculating coolers
21
5.7. Draining
Notice:
 Do not drain the bath fluid while it is hot or cold!
Check the temperature of the bath fluid prior to draining (by switching the
unit on for a short moment, for example).
 Store and dispose of the used bath fluid according to the environmental
protection laws.
MIN
MAX
0
1
2 3 4
5
6
1.
MIN
MAX
0
1
2 3 4
5
6
1.
9.
8.
 Turn the mains switch (1.) off.
 Hold the venting grid, pull out and remove.
 Take the drain tubing (8.) out of the holder and hold it into
a pail.
 Open the drain tap (9.) and empty the unit completely.
 Close the drain tap and replace the drain tubing into the
holder.
 Replace the venting grid.
MIN
MAX
0
1
2 3 4
5
6
9.
8.
1.
In case the recirculating cooler is placed on the floor, the
unit may be drained using a suction pump unit.
 Connect the drain tubing (8.) to the suction pump unit.
 Open the drain tap (9.).
 Switch the pump on and fully empty the unit.