6 configuration – JUMO 705021 mTRON T - Analog Input Module, 8-Ch. Operating Manual User Manual
Page 41
41
6 Configuration
Replacement value
The replacement value is used if the relevant signal is not available (connection to base unit
interrupted or system in "Stop" state).
Status after change of configuration
The connections are available immediately.
Behavior after power on
The connections are available immediately after system initialization.
...\NV_SR01
(Example)
This is the previously selected external input.
Select the module and – in the selector
next to it on the right – the signal to con-
nect to the external input.
List of modules in the system and the
relevant signals
Replacement
value
Replacement value for the relevant signal (The selection On/Off is active if a signal
is assigned to the external input.)
Off
Low level (0)
On
High level (1)
Parameter
Selection/settings
Description
?