JUMO 705020 mTRON T - Analog Input Module, 4-Ch. Operating Manual - Manual (Page 34)

6 Configuration
34
6.2 Analog inputs
The four analog inputs are universal measuring inputs for RTD temperature probes, thermo-
couples, resistance transmitters, resistance/potentiometers, and standard signals.
Setup dialog
Parameter
Parameter Selection/settings Description
Sensor Selection of measuring probe for the relevant analog input
No choice No sensor selected
RTD temp. probe 2-w RTD temperature probe in 2-wire circuit
RTD temp. probe 3-w RTD temperature probe in 3-wire circuit
RTD temp. probe 4-w RTD temperature probe in 4-wire circuit
Resistance transmitter Resistance transmitter
Thermocouple
Current 0 to 20 mA Standard signal
Current 4 to 20 mA Standard signal
Voltage 0 to 1 V Standard signal
Voltage 0 to 10 V Standard signal
Voltage 2 to 10 V Standard signal
Resistance/potentiometer 2-w Resistance/potentiometer in 2-wire cir-
cuit
Resistance/potentiometer 3-w Resistance/potentiometer in 3-wire cir-
cuit
Resistance/potentiometer 4-w Resistance/potentiometer in 4-wire cir-
cuit